PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
Ti 6Al-4V offers a combination of high strength, light weight, formability and corrosion resistance which have made it the most commonly used titanium alloy.
It is an alpha+beta alloy that is heat treatable to achieve moderate increases in strength and is recommended for use at service temperatures up to approximately 660°F (350°C).
Ti 6Al-4V may be considered in any application where a combination of high strength at low to moderate temperatures, light weight and excellent corrosion resistance are required.
VIEW MORE +
6AL-4V ELI GRADE 23 / UNS R56407
Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class, and is also the most common of all titanium alloys. This modification incorporates extra low interstitial (ELI). The wrought material is used in applications where moderate strength, good strength to weight, and favorable corrosion properties are required.
VIEW MORE +
Titanium GRADE 2 CP3/UNS R50400
Ti CP Grade 2 has higher tolerable levels of iron and oxygen and is widely used because it combines excellent formability and moderate strength with superior corrosion resistance. It has a minimum yield strength of 275 Mpa (40 ksi), and relatively low levels of impurity elements, which places it between Grades 1 and 3 in terms of strength.
VIEW MORE +
Titanium Ti-Grade 9 (Ti 3A1-2,5V)
Ti 3Al-2.5V is a titanium near-alpha alloy that represents a good compromise between formability and strength. It is stronger than commercially pure titanium (at both room and elevated temperatures). Unlike Ti 6Al-4V, it has the ability to be cold-rolled. Also known as ASTM B348 Grade 9.
VIEW MORE +
Titanium GRADE 3 CP2/UNS R50550
Ti CP Grade 3 has a higher tolerable level of oxygen than Grade 2, along with higher minimum strength requirements. Commercially pure titanium grades have high corrosion resistance, excellent biocompatibility and good formability. They are classified base on their yield strength and allowable levels of the elements iron, carbon, nitrogen, and oxygen level.
VIEW MORE +
TI 6AL-2SN-4ZR-2MO / UNS #R54620
Ti 6Al-2Sn-4Zr-2Mo is a titanium alpha-beta alloy that was developed for use at elevated temperatures and has shown excellent creep resistance (time-dependent deformation) in applications up to 800°F (425°C).
VIEW MORE +
Ti 6Al-6V-2Sn is a titanium alpha-beta alloy used as a higher strength alternative to standard Ti 6Al-4V because of its elevated alloy content, but that offers lower toughness and ductility.
VIEW MORE +
TI15V3CR-3SN-3AL / UNS # R58153
Ti 15V-3Cr-3Sn-3Al is a titanium beta alloy that is highly heat-treatable to a wide range of mechanical properties with excellent cold-formability
VIEW MORE +
CONTACT US
Tel：+8618953928482
Email：Leona@sdkmsteel.com
WhatsApp：+8618953928482
Add：Room 102, No. 65 Lehuan Road, Shibei District, Qingdao City, Shandong Province
GET A FREE QUOTE