What are the classifications of carbon steel pipes?

Release time:

2022-09-16

In addition to general steel pipes, low- and medium-pressure boiler steel pipes, high-pressure boiler steel pipes, alloy steel pipes, stainless steel pipes, petroleum cracking pipes, and other steel pipes, cold-rolled (rolled) carbon steel pipes also include carbon thin-walled steel pipes, alloy thin-walled steel pipes, and stainless steel pipes. Rusty thin-walled steel pipes, special-shaped steel pipes. The outer diameter of hot-rolled seamless steel pipes is generally greater than 32mm, and the wall thickness is 2.5-75mm. The outer diameter of cold-rolled seamless steel pipes can be up to 6mm, and the wall thickness can be up to 0.25mm. The outer diameter of thin-walled pipes can be up to 5mm, and the wall thickness is less than 0.25mm. Cold rolling has higher dimensional accuracy than hot rolling.

Carbon steel pipes are divided into two categories: hot-rolled and cold-rolled (drawn) steel pipes.

Hot-rolled carbon steel pipes are divided into general steel pipes, low and medium pressure boiler steel pipes, high pressure boiler steel pipes, alloy steel pipes, stainless steel pipes, petroleum cracking pipes, geological steel pipes and other steel pipes.

In addition to general steel pipes, low- and medium-pressure boiler steel pipes, high-pressure boiler steel pipes, alloy steel pipes, stainless steel pipes, petroleum cracking pipes, and other steel pipes, cold-rolled (rolled) carbon steel pipes also include carbon thin-walled steel pipes, alloy thin-walled steel pipes, and stainless steel pipes. Rusty thin-walled steel pipes, special-shaped steel pipes. The outer diameter of hot-rolled seamless steel pipes is generally greater than 32mm, and the wall thickness is 2.5-75mm. The outer diameter of cold-rolled seamless steel pipes can be up to 6mm, and the wall thickness can be up to 0.25mm. The outer diameter of thin-walled pipes can be up to 5mm, and the wall thickness is less than 0.25mm. Cold rolling has higher dimensional accuracy than hot rolling.

General carbon steel pipe: It is made of hot-rolled or cold-rolled high-quality carbon steel such as 10, 20, 30, 35, 45, 16Mn, 5MnV and other low-alloy structural steel or 40Cr, 30CrMnSi, 45Mn2, 40MnB and other alloy steel. Seamless pipes made of 10 and 20 grade low carbon steel are mainly used for fluid transportation pipelines. Seamless tubes made of medium carbon steel such as 45 and 40Cr are used to manufacture mechanical parts, such as stressed parts of automobiles and tractors. Generally, carbon steel pipes must ensure strength and flattening tests. Hot-rolled steel pipes are delivered in a hot-rolled or heat-treated state; cold-rolled steel pipes are delivered in a heat-treated state.

Latest News

Solid solution treatment of stainless steel pipes

The intermediate aging method is heated to (760±15)℃ after solid solution treatment and kept for 90 minutes. Because Cr23C6 carbide precipitates from the austenite, the carbon and alloy element content in the austenitic 904L stainless steel pipe is reduced. , raise the Ms point to 70°C and then cool to room temperature to obtain the martensite + α ferrite + retained austenite structure. The residual austenite will be decomposed after subsequent aging at 510°C.

2022-09-16

Preparation work before welding stainless steel pipe

Stainless steel pipe is a type of pipe that is commonly used. Generally, in order to ensure the quality of the product, we need to perform welding operations before use. It is very important to master the correct operation method, which is also beneficial to our later use.

2022-09-16

What are the factors that cause corrosion of stainless steel plates?

Stainless steel plate is actually a product that is not prone to corrosion. Unless it is in some serious cases, it is impossible for any product to be corrosion-free. If our stainless steel plate is corroded, it may affect its normal performance.

2022-09-16

Applications of carbon steel coils

Carbon steel coils have high strength and toughness and are easy to process and weld, so they are widely used in construction, manufacturing, transportation, chemical industry and other fields. Specifically, carbon steel coils can be used in the following areas:

2022-09-16

What are the classifications of carbon steel pipes?

In addition to general steel pipes, low- and medium-pressure boiler steel pipes, high-pressure boiler steel pipes, alloy steel pipes, stainless steel pipes, petroleum cracking pipes, and other steel pipes, cold-rolled (rolled) carbon steel pipes also include carbon thin-walled steel pipes, alloy thin-walled steel pipes, and stainless steel pipes. Rusty thin-walled steel pipes, special-shaped steel pipes. The outer diameter of hot-rolled seamless steel pipes is generally greater than 32mm, and the wall thickness is 2.5-75mm. The outer diameter of cold-rolled seamless steel pipes can be up to 6mm, and the wall thickness can be up to 0.25mm. The outer diameter of thin-walled pipes can be up to 5mm, and the wall thickness is less than 0.25mm. Cold rolling has higher dimensional accuracy than hot rolling.

2022-09-16

Product features of color coated rolls

It has good performance-price ratio, durable performance and extremely competitive price. Therefore, whether it is architectural designers, engineers or manufacturers, galvanized steel sheets have been widely used in industrial buildings, steel structures and civil facilities, such as garage doors, gutters and roofs.

2022-09-16