Product specifications of angle steel

Release time:

2022-09-16

It is mainly divided into two types: equilateral angle steel and unequal angle steel. Among them, unequal angle steel can be divided into two types: unequal sides and equal thickness and unequal sides and unequal thickness.

It is mainly divided into two types: equilateral angle steel and unequal angle steel. Among them, unequal angle steel can be divided into two types: unequal sides and equal thickness and unequal sides and unequal thickness.

The specifications of angle steel are expressed by the dimensions of side length and side thickness. At present, the specifications of domestic angle steel are No. 2-20, with the number of centimeters as the side length. The same angle steel often has 2-7 different side thicknesses. Imported angle steel indicates the actual size and thickness of both sides and the relevant standards. Generally, those with a side length of more than 12.5cm are large angle steels, those with a side length between 12.5cm and 5cm are medium-sized angle steels, and those with a side length of less than 5cm are small angle steels.

The ordering of import and export angle steel is generally based on the specifications required for use, and the steel grade is the corresponding carbon structural steel grade. Also, apart from the specification number, angle steel does not have a specific composition and performance series. The delivery length of angle steel is divided into two types: fixed length and double length. The fixed length selection range of domestic angle steel has four ranges: 3-9m, 4-12m, 4-19m, and 6-19m according to different specifications. The length selection range of angle steel produced in Japan is 6-15m.

The cross-sectional height of the unequal angle steel is calculated according to the long side width of the unequal angle steel. Refers to steel with an angular cross-section and unequal lengths on both sides. It is a kind of angle steel. Its side length ranges from 25mm×16mm to 200mm×125mm. Rolled by hot rolling mill. General unequal angle steel specifications are: ∠50*32--∠200*125 with a thickness of 4-18mm

Unequal angle steel is widely used in various metal structures, bridges, machinery manufacturing and shipbuilding industries, various building structures and engineering structures, such as house beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, Container racks and warehouses, etc.

Latest News

Solid solution treatment of stainless steel pipes

The intermediate aging method is heated to (760±15)℃ after solid solution treatment and kept for 90 minutes. Because Cr23C6 carbide precipitates from the austenite, the carbon and alloy element content in the austenitic 904L stainless steel pipe is reduced. , raise the Ms point to 70°C and then cool to room temperature to obtain the martensite + α ferrite + retained austenite structure. The residual austenite will be decomposed after subsequent aging at 510°C.

2022-09-16

Preparation work before welding stainless steel pipe

Stainless steel pipe is a type of pipe that is commonly used. Generally, in order to ensure the quality of the product, we need to perform welding operations before use. It is very important to master the correct operation method, which is also beneficial to our later use.

2022-09-16

What are the factors that cause corrosion of stainless steel plates?

Stainless steel plate is actually a product that is not prone to corrosion. Unless it is in some serious cases, it is impossible for any product to be corrosion-free. If our stainless steel plate is corroded, it may affect its normal performance.

2022-09-16

Applications of carbon steel coils

Carbon steel coils have high strength and toughness and are easy to process and weld, so they are widely used in construction, manufacturing, transportation, chemical industry and other fields. Specifically, carbon steel coils can be used in the following areas:

2022-09-16

What are the classifications of carbon steel pipes?

In addition to general steel pipes, low- and medium-pressure boiler steel pipes, high-pressure boiler steel pipes, alloy steel pipes, stainless steel pipes, petroleum cracking pipes, and other steel pipes, cold-rolled (rolled) carbon steel pipes also include carbon thin-walled steel pipes, alloy thin-walled steel pipes, and stainless steel pipes. Rusty thin-walled steel pipes, special-shaped steel pipes. The outer diameter of hot-rolled seamless steel pipes is generally greater than 32mm, and the wall thickness is 2.5-75mm. The outer diameter of cold-rolled seamless steel pipes can be up to 6mm, and the wall thickness can be up to 0.25mm. The outer diameter of thin-walled pipes can be up to 5mm, and the wall thickness is less than 0.25mm. Cold rolling has higher dimensional accuracy than hot rolling.

2022-09-16

Product features of color coated rolls

It has good performance-price ratio, durable performance and extremely competitive price. Therefore, whether it is architectural designers, engineers or manufacturers, galvanized steel sheets have been widely used in industrial buildings, steel structures and civil facilities, such as garage doors, gutters and roofs.

2022-09-16